HVAC Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== DAC-1180 ======

The DAC-1180 is a fully programmable, Native BACnet® Advanced Application Controller that either communicates on Twisted-Pair Ethernet 10-BaseT using BACnet IP and BACnet over Ethernet or an RS-485 LAN using the BACnet MS/TP protocol. It is designed for a wide-range of applications that have medium local I/O requirements. It also supports BACstats and other Delta LINKnet devices.

{{:suppliers:delta_controls:dac-1180.jpg?200|}}

The case of older models looked more like the [[suppliers:delta_controls:dsc_1616e|DSC-1616E]]:
{{:suppliers:delta_controls:dsc-1616e.jpg?100|}}

===== Features =====

  * Native BACnet firmware
  * Fully programmable in GCL+
  * BACnet MS/TP communications (DAC-1180), BACnet/ IP and BACnet Ethernet (DAC-1180E)
  * Super Capacitor for real-time clock and SRAM backup (requires no maintenance) on DAC-1180E
  * Supports 8 BACstat network sensors on LINKnet for room sensing and control or 2 Delta Field Modules on LINKnet for I/O expansion
  * Actuator power terminal (24VAC) for each analog output (can be powered internally or from an auxiliary transformer)
  * Firmware upgrade and database load/ save over the network
  * Supports Modbus capability via flash loading in the field
  * Service port
  * Screw or DIN rail mountable