Differences

This shows you the differences between two versions of the page.

--- suppliers:hvac.io:vigilia:recording [2018/06/08 18:49] – [Step 1 : Connect to a Vigilia server] frozenlock
+++ suppliers:hvac.io:vigilia:recording [2020/07/22 15:02] – old revision restored (2016/08/25 09:00) 95.91.41.38
@@ Line 48: / Line 48: @@
 To start logging a network, **begin by running Wacnet**.
-Make sure you can see the devices on your network by checking the **[[http://localhost:47800/vigilia/configs|Explorer]]** tab. (This link will only work when you have a running Wacnet instance.)
+Make sure you can see the devices on your network by checking the **[[http://localhost:47800/vigilia/configs|Explorer]]** tab.
 Here's an example of what you should see:
-{{:suppliers:hvac.io:vigilia:wacnet-explorer-tab-device.png?600|}}
+{{:suppliers:hvac.io:vigilia:wacnet-explorer-tab-device.png|}}
-Once you have validated that you can see devices from your BACnet network, go and configure a few things in the **[[http://localhost:47800/vigilia/configs|Vigilia Configs]]** page :
+Then, go and configure a few things in the **[[http://localhost:47800/vigilia/configs|Vigilia Configs]]** page :
 ==== Step 1 : Connect to a Vigilia server ====
-** Skip this step if you are using HVAC.IO's servers. (Default)**
+** Skip this step if you are using HVAC.IO's servers. **
 The first thing to configure is a Vigilia API URL. This will tell Wacnet where it should send its data.
@@ Line 105: / Line 105: @@
 Depending on the size of your network, Wacnet will start scanning the devices after a few seconds.
-After a few minutes, you can validate that everything runs smoothly by checking the time taken to scan your network. See "Last scan duration" just above the start/stop buttons. After at least one scan, you should be able to load your project on the Vigilia server and see the scanned devices.
+After a few minutes, you can validate that every runs smoothly by checking the time taken to scan your network. See "Last scan duration", just above the start/stop buttons. After at least one scan, you should be able to load your project on the Vigilia server and see the scanned devices.
@@ Line 113: / Line 113: @@
 === Windows ===
-Assuming you installed the Wacnet .jar file into c:/Wacnet, you can place this script in your startup directory:
+Assuming you installed the Wacnet .jar file into c:/wacnet, you can place this script in your startup directory:
 <file batch wacnet-startup.bat>